Data recovery is the behavior of recovering corrupted, damaged or otherwise data stored in the storage device which is inaccessible. There are many methods to this matter. For starters, if the drive has been physically damaged, you can try to fix it.

If your drive is in good condition, but you are still subject to the loss of data, you may have logical damage. This is the term for when, due to a device failure or power outage or any one of a hundred things, you’ve lost valuable data. One method for recovering data in this fashion is consistency checking. This is the process of checking the specification of the drive and making sure it is consistent with the logical structure. In other words, it checks the main directory of a drive and makes sure everything is in order. If it is not, a list of known errors can be printed and correct. However, if your storage device is majorly damaged, this can and probably will fail completely.

Data carving is another method of recovering data from the drive. This is essentially the process of going into the contents of your drive and looking for files that have no allocation information. This means that, according to your storage device, these files are there for no reason whatsoever.  The user will then find the specific location of files on storage devices recover those files. Data carving, effective but in the long run, can take a lot of time and effort to complete.

To do data recovery, you can use a variety of tools. Because it is extremely difficult to perform tasks, such as data carving and running the system, you can use the boot device directly to a minimal operating system. Many operating systems come with their own consistency check procedures. Windows, for example, has CHKDSK. WiseRecovery is a full featured data recovery program which can restore almost all kinds of data loss. With it your files, photos or important documents are safe even if there is something wrong with your computer. WiseRecovery can restore data loss in many situations and the followings are included.

How to do data recovery with WiseRecovery

Download WiseRecovery here.

http://www.wiserecovery.com/download.php

Run WiseRecovery software, and click on Start scan.

Choose the drive to start scanning.

Now, the scanning process will commence. After scanning, list of file types will be displayed in the left pane.

Click each file type to view files in it. You will see thumbnails when you click on the file type.

You can either recover all or selected files by clicking the Recovery button.

Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick.

Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. Luckily there’s another way to recover deleted files.

When your operating system deletes a file, all it really does is mark the space on your hard drive that your file occupies as free space. It’s still there, but your computer is now perfectly happy to write new data on top of it—at which point the file recovery process becomes a lot more difficult. That means you should do as little computing as possible until you find the file you’re looking for, since every time you save a new file—every time your computer writes information to your hard drive—your chances of recovering the file go down.

You can use WiseRecovery to restore your lost photos

Wiserecovery is such an easy and reliable tool, which can help you get back the deleted, corrupted, formatted and lost WMV files from hard drive or partition. Download the software and follow the guide to recover WMV files with only 3 steps.

1. Download WiseRecovery Software, install it and launch it. Click the “Start Scan” button on the main window of WiseRecovery.

2. You can see the list of all volumes found on your computer, select the exact drive and click the “Next” button to start scanning. If you can’t see the drive, please make sure your external drives are connected, and click ‘Refresh’ button.

3. It will take about 2-10 minutes to scan, it depends on your disk size and files amount on the disk. After scanning is finished, you can preview text document and picture files.

You may lose a WMV file

Nowadays there is growing awareness of the trouble caused by data loss. Everything has two sides and digital media is not an exception. It has both advantages and disadvantages.

Many of us have encountered an embarrassing situation where we search for a certain file in our computer only to find that we have deleted it a few days before. Have you ever lost a WMV file? You may lose a WMV file due to these issues:

1. You just deleted it and emptied the recycle bin
2. Corruption of storage mediums
3. You formatted your hard drive accidently
4. Virus infection of WMV videos
5. The partitions changed or damaged.
6. Sudden power interruption on your computer.

What you can do

WMV files are widely used in devices like cameras, PSP, iPod, mobile phones. When the WMV files are not in the place where you save them. Don’t worry. They might not have been erased permanently. In fact, you can recover the lost WMV files in the right way. If the lost WMV files were originally stored on your computer, the first thing you should do is to check your Recycle Bin. If you haven’t deleted them from your Recycle Bin, you can recover them by right click on them and choose “restore” and you can find them in their original folder. Even if you saved the lost WMV files on a removable device, you can recover them with the help of an excellent WMV recovery program.

Wiserecovery is such an easy and reliable tool, which can help you get back the deleted, corrupted, formatted and lost WMV files from hard drive or partition. Download the software and follow the guide to recover WMV files with only 3 steps.

How to do WMV file recovery

1. Download WiseRecovery, install it and launch it. Click the “Start Scan” button on the main window of WiseRecovery.

2. You can see the list of all volumes found on your computer, select the exact drive and click the “Next” button to start scanning. If you can’t see the drive, please make sure your external drives are connected, and click ‘Refresh’ button.

3. It will take about 2-10 minutes to scan, it depends on your disk size and files amount on the disk. After scanning is finished, you can preview text document and picture files.

Note: If you are not able to get the desired results after Deleted File Recovery, go back to home window and select the option “RAW Recovery” or “Partition Recovery “.

Flash Video is a container file format used to deliver video over the Internet using Adobe Flash Player versions 6–11. Flash Video content may also be embedded within SWF files. There are two different video file formats known as Flash Video: FLV and F4V. The audio and video data within FLV files are encoded in the same manner as they are within SWF files. The latter F4V file format is based on the ISO base media file format and is starting with Flash Player 9 update 3.[1][2] Both formats are supported in Adobe Flash Player and currently developed by Adobe Systems. FLV was originally developed by Macromedia.

If you cannot open your FLV file or it is lost, do not panic. You can get it back with the help of Wiserecovery. WiseRecovery is a full featured data recovery software that can effectively recover lost data due to almost all kinds of recoverable data loss. The technology used by Lionsea is cutting-edge, even within the data recovery sector. This Windows data recovery program works without any damage to your data. It doesn’t move, delete, or modify your files in order to avoid further damage or overwriting.

How to use Wiserecovery

1. Download It here.http://www.wiserecovery.com/download.php Run WiseRecovery software, and click on Start scan.

2. Choose the drive to start scanning.

3. Now, the scanning process will commence. After scanning, list of file types will be displayed in the left pane.

4. Click each file type to view files in it. You will see thumbnails when you click on the file type.

5. You can either recover all or selected files by clicking the Recovery button.

CF Cards are unique memory storage devices that can be used on camera, cell photos, PCs and other electronic devices. The “CF” stands for “Compact Flash”. The flash memory card showcases in a variety of Megabyte or Gigabyte capacities. You can use it to store different kinds of data files on any of the electronic devices that can support it. If you mistakenly delete files from the card, there’s no need to panic. You can always recover such files if you didn’t format the card in any way. Here are some tips for you.

Data recovery can be a difficult task. It should be mentioned that loss of data is not always due to users’ fault. Sometimes, the most common causes are power supply shutdowns, internet connection malfunctions and physical damages of a hard drive. The latter case is the most challenging. The best option is to do nothing. If you try to recover data by yourself and fail, it will be impossible to recover the data even if experts and specialized companies are in charge. Therefore, if you are not sure you can deal with such a task, find a professional software.

WiseRecovery can recover your files without paying that much.

WiseRecovery is a good choice. WiseRecovery is a powerful data recovery software which can help you recover almost all kinds of data loss. With it your files, photos or important documents are safe even if there is something wrong with your computer.

How to do raid recovery with WiseRecovery

• 1. Download Wisereocvery. Run WiseRecovery software, and click on Start scan.
• 2. Choose the drive to start scanning.
• 3. Now, the scanning process will commence. After scanning, list of file types will be displayed in the left pane.
• 4. Click each file type to view files in it. You will see thumbnails when you click on the file type.
• 5. You can either recover all or selected files by clicking the Recovery button.

Professional Data Recovery Software, Recover Lost or Deleted Files in 3 Steps

Accidentally deleting drivers you need can cause problems. Hardware won’t function properly–or at all without the drivers needed to run it. In many cases, finding the drivers you need can be difficult, especially if you don’t have an installation CD. Using System Restore can undo the driver deletion, because a restore point is created every time you change something on your computer.

Method A:

• Save your work and close all programs. You will be restarting your computer during the process.
  Click “Start” from the task bar and then choose “All Programs.”
  Click “Accessories” from the program menu. Choose “System Tools” from the side pop-out menu and then select “System Restore.”
  Click “Restore my computer to an earlier time” from the Welcome screen. Click “Next” at the bottom.
  Choose a date in bold from the calendar shown on the Restore Point page. The date that you choose should be an earlier one, like a day or two before the deletion occurred. Click “Next” at the bottom of the window.
  Click “Next” on the next page. The restoration begins, and your computer will restart.
  Click “OK” from the completion window that appears when your computer loads again.

Method B:

Wiserecovery is an excellent recovery program. There are three recovery modules on the main window of the interface:

• Download WiseRecovery Software, install it and launch it. Click the “Start Scan” button on the main window of WiseRecovery.
• You can see the list of all volumes found on your computer, select the exact drive and click the “Next” button to start scanning. If you can’t see the drive, please make sure your external drives are connected, and click ‘Refresh’ button.
• It will take about 2-10 minutes to scan, it depends on your disk size and files amount on the disk. After scanning is finished, you can preview text document and picture files.
• Select the files or folders that you want to recover and press the “Recover” button, on the popup window, please select target directory to save the recovered files. WiseRecovery will recover files instantly. Now you can click “open the destination directory” button to see the recovered files!
• Note: Please don’t recover the file to the disk you are recovering files from!

Method C:

• Download & install DriverTuner.
• Click the down arrow button on upper right interface and choose to enter license.
• Scan for new drivers.
• Click download (just download drivers you want, you don’t need to download all drivers)
• After download completed, click ‘setup’ button to install it.
• Reboot computer.

http://www.lionsea.com/

Microsoft Excel is a necessary program with which you can create detailed spreadsheets and colorful charts. Excel is as important as Word and Outlook. Nothing is more annoying than realizing you’ve forgotten to save an excel file which is really important. Unpredictable power off or software crash are often the culprits that cause. However, if an XLS file is damaged or corrupted, all of the important data could be lost. Fortunately, Microsoft Excel has an Autosave feature that can save it automatically every few minutes. If you cannot open an XLS file or it  closes immediately after opening, you can use Excel’s tools to try to recover it and save crucial data.

Method A:

• Start Excel. Click the “File” menu or the “Office” button and select “Open.”
• Find the file that is not working correctly in the “Open” window. Click on it once to select it. Click the arrow next to “Open” and select “Open and Repair.”
• Click “Repair.” This option will attempt to repair and open the complete XLS file as close to the original format as possible.
• Close the Excel window and reopen it if the repair did not recover the XLS file. Go back to the “Open” window and click on the file. Click the drop-down arrow to the right of “Open” and click “Open and Repair” once more. This time, click the “Extract Data” button.
• Select “Recover Formulas” to recover as much of the file as possible. If this does not work, go back and choose “Convert to Values.” If the last option is the only one that recovers data from the file, you may have to format the data and insert formulas again.

Method B:

If Method A cannot help you to recover it, you can try a professional data recovery program. I recommend Wiserecovery to you. It is a top ranking program which has great reviews.

• Download WiseRecovery Software, install it and launch it. Click the “Start Scan” button on the main window of WiseRecovery.
• You can see the list of all volumes found on your computer, select the exact drive and click the “Next” button to start scanning. If you can’t see the drive, please make sure your external drives are connected, and click ‘Refresh’ button.
• It will take about 2-10 minutes to scan, it depends on your disk size and files amount on the disk. After scanning is finished, you can preview text document and picture files.
• Select the files or folders that you want to recover and press the “Recover” button, on the popup window, please select target directory to save the recovered files. WiseRecovery will recover files instantly. Now you can click ‘open the destination directory’ button to see the recovered files!
• Note: Please don’t recover the file to the disk you are recovering files from!

http://www.lionsea.com/

Every coin has two sides and digital media is not an exception. It has both advantages and disadvantages. Nowadays there is growing awareness of the inconvenience caused by data loss.
Many of us have encountered an embarrassing situation where we search for a certain file in our computer only to find that we have deleted it a few days before. Have you ever lost a MTS file? You may lose a MTS file due to these issues:

• You just deleted it and emptied the recycle bin
• Corruption of storage mediums
• You formatted your hard drive accidently
• Sudden power interruption on your computer.
• Virus infection of MTS videos
• The partitions changed or damaged.

How to get it back.
MTS files are widely used in devices such as cameras, PSP, iPod, mobile phones. When the MTS files are not in the place where you save them. Don’t worry. They might not have been erased permanently. In fact, you can recover the lost MTS files if you have a little more knowledge about computer data theory. If the lost MTS files were originally saved on your PC, the first thing you should do is to check your Recycle Bin. If you haven’t cleaned them up from your Recycle Bin, you can recover them by right click on them and choose “restore” and you can find them in their original folders. Even if you saved the lost MTS files on a removable device, you can recover them with the help of a good MTS recovery software.
Wiserecovery is such an easy and reliable tool, which can help you get back the deleted, corrupted, formatted and lost MTS files from hard drive or partition. Download the software and follow the guide to recover MTS files with only 3 steps.
How to do MTS file recovery

1. Download WiseRecovery Data Recovery Software, install it and launch it. Click the “Start Scan” button on the main window of Data WiseRecovery.

2. You can see the list of all volumes found on your computer, select the exact drive and click the “Next” button to start scanning. If you can’t see the drive, please make sure your external drives are connected, and click ‘Refresh’ button.

3. It will take about 2-10 minutes to scan, it depends on your disk size and files amount on the disk. After scanning is finished, you can preview text document and picture files.
http://www.lionsea.com/

RAID is an acronym for Redundant Array of Independent Disks. It is a method of combining several hard disk drives into one unit. This method offers fault tolerance (the ability of a system to continue to perform functions even when one or more hard disk drives have failed) and higher protection against data loss than a single hard drive. RAID is now used as an umbrella term for computer data storage schemes that can divide and replicate data among multiple physical drives: RAID is an example of storage virtualization and the array can be accessed by the operating system as one single drive.
RAID provides high performance to our computer users, especially server users but it also brings us with much trouble. However, when we encounter data loss due to system crash, virus attack or power failure, it will get serious because it causes greater loss if we recover data from raid at random. Therefore, we should get a professional raid recovery software for the safeness of our computers.

Different Levels of RAID

There are several different levels of RAID available. Each level offers various advantages in terms of data availability, cost and performance. Our best bet is to assess your needs in order to determine which level works best for you. Here we introduce some commonly-used RAID levels. RAID 0 provides data striping but no redundancy. This improves performance but does not deliver fault tolerance. If one disk fails then all data in the array is lost. RAID 1 provides twice the read transaction rate of single drives and the same write transaction rate as single disks. RAID 5 provides data striping at the byte level and also stripe error correction information. This results in excellent performance and good fault tolerance.

How to do raid recovery with WiseRecovery

1. Run WiseRecovery software, and click on Start scan.
2. Choose the drive to start scanning.
3. Now, the scanning process will commence. After scanning, list of file types will be displayed in the left pane.
4. Click each file type to view files in it. You will see thumbnails when you click on the file type.
5. You can either recover all or selected files by clicking the Recovery button.

http://www.lionsea.com/

Basic storage involves dividing a disk into primary and extended partitions. This is the route that all versions of Windows that were reliant on DOS-handled storage took, and disks formatted in this manner are known as basic disks. Volumes can use any supported file system. The feature makes the storage device more efficiency, but although makes them difficult for conventional disk image software to handle.

Generally speaking, dynamic disks can contain an unlimited volume of data, but they cannot contain partitions or logical drives. Dynamic disks offer more management flexibility without the partition limitation of conventional storage. Volumes in dynamic disks can span several physical disks, or be striped across multiple disks for better performance. Volumes in dynamic disks can also be mirrored or set up as a RAID 5 array. Dynamic volumes can even be confined to a single disk. Since you can perform disk and volume operations on dynamic disks without restarting Windows, dynamic storage gives storage users multiple options to deal with the rising volume of data.

While dynamic disks offer new powerful tools, there are also some serious limitations that aren’t present with conventional drives. Many of these limits are related to restoration. Dynamic storage can scatter pieces of data across several drives, which means that many conventional disk imaging tools that read blocks off the disk won’t capture a usable image.

WiseRecovery is a full featured data recovery software which can restore almost all kinds of data loss. With it your files, photos or important documents are safe even if there is something wrong with your computer. WiseRecovery can restore data loss in many situations and the followings are included.

How to do dynamic disk recovery with WiseRecovery

1. Run WiseRecovery software, and click on Start scan.
2. Choose the drive to start scanning.
3. Now, the scanning process will commence. After scanning, list of file types will be displayed in the left pane.
4. Click each file type to view files in it. You will see thumbnails when you click on the file type.
5. You can either recover all or selected files by clicking the Recovery button.

http://www.lionsea.com/